Statistics |
Total online: 1 Guests: 1 Users: 0 |
|
Main » 2014 » February » 21 » How you can Connect a car Stereo to an Amp Diagram
11:27 AM How you can Connect a car Stereo to an Amp Diagram |
Including an
amplifier to a car audio process is really a superior solution to boost power
managing whereas cutting down distortion. Therefore, customers report an
increase in sound quality. The huge bulk of head units integrate a minimum of
one RCA preout jack, allowing for connection of an external amplifier.
Regardless of whether this includes basically connecting a subwoofer or
amplifying all speakers, connecting a DVR
K6000 to an amplifier is generally well worth the hard work.
Accessibility the rear with the automobile stereo. Find the RCA jacks,
or pigtails, and the blue "REM" wire over the unit's harness.Minimize a length
of main wire suitable to reach the amplifier's mounting location. A simple
technique to do this would be to reduce it the same length as the RCAs picked to
run to your amp.Strip 1/4 inch of insulation from the two ends of the minimize
major wire. Connect a 16-gauge connector to one end of this wire, making use of
the crimp tool.
Strip 1/4 inch of insulation from your "REM" wire for
the stereo's harness. Insert this wire into the other end of the crimp within
the major wire, and crimp it securely.Route the Honda
hand grip and major wire to your amplifier's mounting spot.
Plug the RCA cables in to the acceptable jacks over the amplifier.
Loosen the "REM" terminal screw to the amp, insert the main wire and tighten the
screw back down making use of the proper screwdriver.
|
Views: 278 |
Added by: xoobao
| Rating: 0.0/0 |
|
|
|